Automatic Bus People Counter All In One Real Time Video GPS
Tracking for coaster mini bus
- 4CH 720P 3G/4G Realtime Video GPS Tracking Mobile DVR with Bus
People Counter all in one system.
- The Vieo- Counting Bus People Counter(VPC) with binocular lens is
developed based on advanced Video Counting&image analysis
technoloy.
- It judges passenger's number by capturing human characteristics
such as head, shoulders, body and body's get-on& get-off Movement
characteristics and obtains accurate counting results by high-speed
DSP intelligent algorithm.
- After many year's improment and development, the core calculation
has been successfully used in different application scenarios and
vehicles. Normally the accuracy of statistics is over 98% and with
crowded circumstances, the accuracy is over 95%.
- It can automatically filter backpack, luggage etc.
1. Main Unit(below)
Counter Processor(brain), Mounted at the bottom of seat or ceiling
of bus, process and calculate the data, send to HDD storage or
3g/4g
2. Binocular Camera
Mounted on the ceiling of the doors, counts passengers get in or
out of the bus.
3. Door Sensor
Door open/close sensor, is used for sensing the door open or close
status.
4. 2~4 Monitoring Cameras
5. One monitor for Option
Main Parameters
1.1 Counting camera
Image Sensor:1/3 SONY
CCD TV System: PAL/NTSC
TV Lines:700TVL
Image Output: Synchronous sampling
output Lens’ Spacing:5MM
Len:960*576 Pixel,3.6 mm (2.8mm/3.6mm/4mm/6mm Optional)
Viewing Angle:55 degree
Installation height Range:2.1M~2.3M(3.6MM len), 1.9M~2.1M(2.8MM
len),
2.3M~2.5M(4MM len)
Detecting Door Width Range:0.4M~1.2M
White Balance: Auto Shutter:1/50-
1/80000(s) 1/60-1/80000(s) Frame
rate:25 FTPS
Video Output Interface: Composite video output, 75Ω 1Vp-p
Aviation Gain: Auto
SNR:＞48db
Power Supply:DC12
V Power:≤1W
Working Temperature:-30～+55℃
Relative Humidity:10%～90% Not condensed
Cooling: no active cooling, passive structure with heat
dissipation Product Size:155(L)*50(W)*55(H)MM
Weight:0.32KG
1.2 Door sensor
Contact Way: Connected when touch, disconnected when separate Max
Power:10W
Min Switch Voltage:100VDC
Avalenche Voltage:200VDC Max Switch
Current:0.5A Max Load Current:1A
Max Contact Resistance:100mΩ
Min Insulation Resistance:10~10Ω Moving Time:0.4ms
Bounce Time:0.3ms
Release Time:0.05ms
Max Working Frequency:5000±400HZ Sensitivity:07-10AT
Minimum Reset Index:5AT Max Contact
Capacity:0.3pF Housing Material: Zinc Alloy
Product Color: Gray
Working Temperature:-30℃~80℃ Working Relative
Humidity:≤95%(40℃)
Sense Magnetic /Release Distance:35-45MM
It's installed closed to the door like the picture shows below:
Platform show
Notice: If you buy our 3G counter(with mdvr together), you will use
our platform ;if you buy our GPRS counter ,also you can use our
management platform tool ,also you can use your own platform with
our protocol by RS232/485 interface.
FAQ
1)What purpose does the sensor serve?
The sensor is designed to count the number of bus passengers
getting on or off.
All passengers are counted regardless of their payment method
(cash, pass, welfare ticket, or discount ticket).
2)How is it used?
The sensor can be used to get information on the usage status and
crowding of bus passengers.
Take advantage of the sensor's abilities to create an optimum time
table by knowing the number of passengers getting on or off at a
particular stop, at what times, on which lines, and in which zones.
3)What type of sensor is it?
The sensor (camera) is installed in the bus ceiling near an
entrance and exit.
It is compact and easy to install.
A single sensor can count people getting both on and off.
Please contact us for specific manual in details
